SUN RAY X-1 TARGET PROBE with modified upper shaft

for the Minelab Explorer S, XS, II, SE & Quattro

· Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, ground and moisture conditions!

· Light weight, waterproof/submersible 1" X 9" probe. Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy switching from coil to probe. Makes coil changes super fast as coil cable will no longer be inserted into upper shaft! While the X-1 probe is waterproof the switch box is water resistant and must not be submersed.

· X-1 gives operator ALL of the same functions as stock coil including accurate visual and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.

· Accurate approximate depth indications from tip of probe to target can be achieved through visual observation of the Explorer's depth gauge (although the scale will be different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.

· Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs) 

· Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.

· No external buzzers or lights are needed as all targets are heard clearly through your detector headphones!

· No extra batteries required as the X-1 utilizes the detectors power source.

$330